2917 Pipe Trolley for Single Pipe, 0.25t Lever Hoist, Swivel Caster
◆ Thank you for viewing!
We will respond in the unlikely event of an initial defect.
◆ Additional shipping fees will apply for delivery to Hokkaido, Okinawa, and remote islands. Please comment in the comment section if this applies to you.
◆ Product Description
Easy one-touch installation!! Quiet operation with resin silent wheels!
■ Rated Load: 250kg
■ Compatible Support Pipe: 35-60mm
■ Main Unit Weight: 0.65kg
Uses: Can be used to attach hoists, chain blocks, pulleys, etc. to scaffolding pipes. Enables movement and transport of loads on scaffolding pipes.
■ Precautions
? Please pay attention to the strength of the pipe itself, support distance, etc.
? Ensure that the nuts are securely tightened to prevent the pipe and this product from slipping due to lateral pulling.
? Perform daily inspections before use. Do not use if there are any damages, abnormalities, strange noises, corrosion, deformation, or other problems with the main unit.
? Do not modify the main unit in any way.
? Be careful not to restrict the movement of the trolley, install it within the operating range of other moving devices, and ensure it does not collide with obstacles or stoppers during operation.
? Do not lift loads exceeding the rated load.
? Do not enter under suspended loads or within the range of movement (e.g., direction of travel). Also, do not transport loads over people's heads.
? Do not use for welding or cutting work, or as a ground while suspending steel plates.
? When storing, avoid places prone to rain or rust, wipe off dirt and water droplets, lubricate moving parts and chains, and store at the end of the rail without suspending loads.
? We are not responsible for any accidents or damages caused by incorrect use that does not adhere to the precautions.
We will respond in the unlikely event of an initial defect.
◆ Additional shipping fees will apply for delivery to Hokkaido, Okinawa, and remote islands. Please comment in the comment section if this applies to you.
◆ Product Description
Easy one-touch installation!! Quiet operation with resin silent wheels!
■ Rated Load: 250kg
■ Compatible Support Pipe: 35-60mm
■ Main Unit Weight: 0.65kg
Uses: Can be used to attach hoists, chain blocks, pulleys, etc. to scaffolding pipes. Enables movement and transport of loads on scaffolding pipes.
■ Precautions
? Please pay attention to the strength of the pipe itself, support distance, etc.
? Ensure that the nuts are securely tightened to prevent the pipe and this product from slipping due to lateral pulling.
? Perform daily inspections before use. Do not use if there are any damages, abnormalities, strange noises, corrosion, deformation, or other problems with the main unit.
? Do not modify the main unit in any way.
? Be careful not to restrict the movement of the trolley, install it within the operating range of other moving devices, and ensure it does not collide with obstacles or stoppers during operation.
? Do not lift loads exceeding the rated load.
? Do not enter under suspended loads or within the range of movement (e.g., direction of travel). Also, do not transport loads over people's heads.
? Do not use for welding or cutting work, or as a ground while suspending steel plates.
? When storing, avoid places prone to rain or rust, wipe off dirt and water droplets, lubricate moving parts and chains, and store at the end of the rail without suspending loads.
? We are not responsible for any accidents or damages caused by incorrect use that does not adhere to the precautions.
Category
Single Pipe Clamps
Condition
New/unused
Shipping
Included in price (by seller)
From
Unspecified
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
